-
Would you like to experience what going to school was like in the late 1800s? to start with, imagine everyone in school only one classroom.
In the 19th and early 20th centuries, most American students went to a one-room schoolhouse. A single teacher would typically(典型地) have students in the first through eighth grades, and she taught them all. The number of students varied from six to 40 or more. The youngest children sat in the front, while the oldest students sat in the back. The teacher usually taught reading, writing, arithmetic, history, and geography. Students memorized(记忆) and retold their lessons.
The classroom of a one-room schoolhouse probably looked much like your own. The teacher’s desk stood on a raised platform(讲台) at the front of the room, however, and there was a wood-burning stove since there was no other way of heating. The bathroom was outside in an outhouse.
In Honeoye Falls, New York, there is a one-room schoolhouse where kids today can experience what it was like to the students in the late 19th century. For a week during the summer, they wear 19th century clothes and learn the way children learned more than a hundred years ago.
What else has changed about school since the 19th century? For more information, please visit our website: www. Locallygacy.com.
1. What does the word “varied” in the Paragraph Two mean in Chinese?
A. 变化 B. 排列 C. 调整 D. 减少
2. Students in the late 19th century could learn_____?
A. reading, writing, sports, history, and science.
B. reading, art, arithmetic, history, and geography
C. reading, writing, arithmetic, history, and geography
D. reading, physics, chemistry, history, and geography
3.Which of the following best shows what a one-room schoolhouse was like in the late 19th century?
A. 
B. 
C. 
D. 
4.Some kids go to Honeoye Falls to _____.
A. try the food in the late 19th century
B. learn the subjects over a century ago
C. memorized and retell their lessons they have learn
D. experience the way children learned over a century ago
5.Which of the following is TRUE about the students in a one-room schoolhouse？
A. They had only one teacher.
B. They had different classrooms.
C. They could choose the seats they liked.
D. They learned more subjects than we do now.
-
—What would you like to say to your ________ before leaving school?
—I’d like to say “Thank you very much! I’ve learnt a lot from you in the past three years.”
A. teachers B. workers
C. doctors D. engineers
-
—What would you like to say to your ________ before leaving school?
—I’d like to say “Thank you very much! I’ve learnt a lot from you in the past three years.”
A. teachers B. workers
C. doctors D. engineers
-
—Would you like to go to school ______ foot with me?
—I’d like to.
A. on B. by C. in
-
If your pen broke at school today, what would you do? You would go to a shop and buy a new one. What if you could simply print out a real, working pen with your 3-D printer without leaving your room?
Ten years ago people could only see 3-D printing in science fiction movies. But now 3-D printing is here and it's bringing big changes.
Unlike normal printing that can only copy a 2-D picture with ink. 3-D printing can build almost anything made from material. The printer layers(分层) the material in different shapes to create the object you want to be copied.
The 3-D printer has been used to make many different things. People have made cups, cars and even an airplane with it. Doctors have been using 3-D printers for several years. People's nervous systems(系统) have been printed out in 3-D form in medical research. Some body parts have been printed and used in hospital. Several months ago, doctors used a 3-D printer to rebuild the face of a person who had a bad accident. In the future, it is expected that the printer will make human organs(器官)to save more lives.
However there are drawbacks to the printer. At the moment, printing can be quite slow and it's still rather expensive. The average(平均的) price of a household printer is around $1,700, not including the cost of the materials.
But as the technology develops, it shouldn't be long before disadvantages are improved. Only time will tell where this new technology will take us.
1.Where could people see 3-D printing ten years ago?
A. In large high school. B. In science fiction movies.
C. In digital camera shop. D. In hospital.
2.What can’t People make with a 3-D printer so far?
A. An airplane. B. A cup. C. The face of a person. D. Human organs.
3.What does the underlined word "drawbacks" mean?
A. 不足 B. 趋势 C. 优点 D. 影响
4.Which of the following is TRUE?
A. The normal printer can build 3-D objects you want.
B. No nervous systems are printed out in 3-D form.
C. The 3-D printing can be cheaper and faster in the future.
D. There will be no drawbacks to the 3-D printing in the future.
5.What's the best title of the passage?
A. The advantages of 3-D printing B. The Disadvantages of 3-D Printing
C. The Changes Brought by 3-D Printing D. he Rapid Development of Science
-
If your pen broke at school today, what would you do? You would go to a shop and buy a new one. What if you could simply print out a real, working pen with your 3-D printer without leaving your room?
Ten years ago people could only see 3-D printing in science fiction（虚构的） movies. But now 3-D printing is here and it’s bringing big changes.
Unlike normal printing that can only copy a 2-D picture with ink（油墨），3-D printing can build almost anything made from material. The printer layers(分层) the material in different shapes to create the object you want to be copied.
The 3-D printer has been used to make many different things. People have made cups cars and even an airplane with it.
Doctors have been using 3-D printers for several years. People’s nervous systems （神经系统）have been printed out in 3-D form medical research. Some body parts have been printed and used in hospital. Several months ago, doctors used a 3-D printer to rebuild the face of a person who had a bad accident. In the future, it is expected（期待） that the printer will make human organs（器官） to save more lives.
However， there are drawbacks to the printer. At the moment, printing can be quite slow and it’s still rather expensive. The average(平均的) price of a household printer is around $1,700,not including the cost of the materials.
But as the technology develops, disadvantages will be improved. Only time will tell where this new technology will take us.
1.People could see 3-D printing in_________ten years ago.
A. large high school
B. science fiction movies
C. digital camera shop
2.People still can’t make a(n)________with a 3-D printer so far
A.airplane B.face C.organ
3.What does the underlined word “drawbacks” mean?
A.不足 B.趋势 C.优点
4.Which of the following is TRUE?
A.The normal printer can build 3-D objects you mant.
B.No nervous systems are printed out in 3-D form.
C.The 3-D printing can be cheaper and faster in the future
5.What’s the best title of the passage?
A.The disadvantages of 3-D printing
B.the changes brought by 3-D printing
C.The rapid development of science
-
If your pen broke at school today,what would you do?You would go to a shop and buy a new one.What if you could simply print out a real,working pen with your 3-D printer without leaving your room?
The 3-D printer has been used to make many different things.People have made cups cars and even an airplane with it.
Doctors have been using 3-D printers for several years.People’s nervous systems have been printed out in 3-D form medical research.Some body parts have been printed and used in hospital.Several months ago,doctors used a 3-D printer to rebuild
Ten years ago people could only see 3-D printing in science fiction movies.But now 3-D printing is here and it’s bringing big changes.
Unlike normal printing that can only copy a 2-D picture with ink.3-D printing can build almost anything made from material.The printer layers(分层) the material in different shapes to create the object you want to be copied.the face of a person who had a bad accident.In the future,it is expected that the printer will make human organs to save more lives.
However there are drawbacks to the printer.At the moment,printing can be quite slow and it’s still rather expensive.The average(平均的) price of a household printer is around $1,700,not including the cost of the materials.
But as the technology develops,it shouldn’t be long before disadvantages are improved.Only time will tell where this new technology will take us.
根据短文内容，从题中所给的A、B、C、D四个选项中，选择最佳答案。
1.People could see 3-D printing in_________ten years ago.
A.large high school B.science fiction movies
C.digital camera shop D.hospital
2.People still can’t make a(n)________with a 3-D printer so far.
A.airplane B.face C.organ D.cars
3.What does the underlined word “drawbacks” mean?
A.不足 B.趋势 C.优点 D.影响
4.Which of the following is TRUE?
A.The normal printer can build 3-D objects you want.
B.No nervous systems are printed out in 3-D form.
C.The 3-D printing can be cheaper and faster in the future.
D.There will be no drawbacks to the 3-D printing in the future.
5.What’s the best title of the passage?
A.The advantages of 3-D printing
B.The disadvantages of 3-D printing
C.The changes brought by 3-D printing
D.The rapid development of science
-
If your pen broke at school today,what would you do?You would go to a shop and buy a new one.What if you could simply print out a real,working pen with your 3-D printer without leaving your room?
Ten years ago people could only see 3-D printing in science fiction movies.But now 3-D printing is here and it’s bringing big changes.
Unlike normal printing that can only copy a 2-D picture with ink.3-D printing can build almost anything made from material.The printer layers(分层) the material in different shapes to create the object you want to be copied.
The 3-D printer has been used to make many different things.People have made cups cars and even an airplane with it.
Doctors have been using 3-D printers for several years.People’s nervous systems have been printed out in 3-D form medical research.Some body parts have been printed and used in hospital.Several months ago,doctors used a 3-D printer to rebuild the face of a person who had a bad accident.In the future,it is expected that the printer will make human organs to save more lives.
However there are drawbacks to the printer.At the moment,printing can be quite slow and it’s still rather expensive.The average(平均的) price of a household printer is around $1,700,not including the cost of the materials.
But as the technology develops,it shouldn’t be long before disadvantages are improved.Only time will tell where this new technology will take us.
根据短文内容，从题中所给的A、B、C、D四个选项中，选择最佳答案。
1.People could see 3-D printing in_________ten years ago.
A.large high school B.science fiction movies
C.digital camera shop D.hospital
2.People still can’t make a(n)________with a 3-D printer so far.
A.airplane B.face C.organ D.cars
3.What does the underlined word “drawbacks” mean?
A.不足 B.趋势 C.优点 D.影响
4.Which of the following is TRUE?
A.The normal printer can build 3-D objects you want.
B.No nervous systems are printed out in 3-D form.
C.The 3-D printing can be cheaper and faster in the future
D.There will be no drawbacks to the 3-D printing in the future.
5.What’s the best title of the passage?
A.The advantages of 3-D printing
B.The disadvantages of 3-D printing
C.The changes brought by 3-D printing
D.The rapid development of science
-
补全对话。（5’）
A：What are you going to do next Sunday, Tom?
B：Nothing special.
A：Would you like to go to the movies?
B：1. What shall we see?
A：Let’s go to see The Lion King.
B：I saw it last week, but I don’t mind seeing it again.
A：Really? 2.B：I think it’s one of the best movies. It tells how an African lion becomes the king.
A：I see. Let’s go to Guangming Movie Theatre.
B：All right. 3..
A：How about meeting at the gate of our school?
B：Good. 4.A：At 6:30.
B：OK. See you then.
A：5.
-
A.Where would you like to go?
B.What would you do when you had a million dollars?
C.Could you tell me how to get to the hospital?